Triumph Spitfire / GT6 / Lotus 7 - Wire Wheel Conversion Kit
$399.99 USD
$399.99 USD
$425.95 USD
Oferta
Agotado
Los gastos de envío se calculan en la pantalla de pago.
Only -14 units left
No se pudo cargar la disponibilidad de retiro
Secure checkout with
About the Product
These kits fit the following:
Triumph Spitfire (all models)
Triumph GT6 (all models)
Lotus 7
Triumph GT6 (all models)
Lotus 7
This kit converts steel wheel cars (listed above) to accept splined wire wheels. Simply bolt them on, add your new wire wheels from BritishWireWheels.com, tighten the spinners, and off you go.
IMPORTANT:
- Option #1 - hubs are specific to stock Spitfire, GT6, and Lotus 7 13" wheels. They are considered "Short Nose" hubs.
-
Option #2 - hubs for customers wanting to run wheels from an MGB, or TR series car (14" or 15"). These are considered "long nose" hubs. IMPORTANT - make sure your suspension is in proper order, and you have clearance on the inner fender well to run larger wire wheels and tires.
(see attached picture for visual - the depth of the stock splines is "shorter", or shallower, and the splines on the "long nose" hubs are longer to accept larger wire wheels.
* NOTE: Each of these bolt-on splined hubs will increase your track approximately 1.25" per corner. Calculate the backspace on your new wheels accordingly.
Everything you need is included:
4 Splined Hubs
16 mounting nuts
4 "Knockoff" spinners (2 left / 2 right)
(Product Source: England)
Free Shipping in the U.S. and Puerto Rico.
